About: 3580 results

Solved: Uart 4M Baud Rate - Community Forums - Xilinx Forums
https://forums.xilinx.com/t5/General-Technical-Dis ...
I use clock IP to convert it to 100MHz. And I divide 25 to get 4MHz(4M baud). I try all possibilities using slewrate/drive power/cmos-lvttl etc. Unfortunately, i can't read correct data(0x19) at 4M baud rate. Bit pattern(00011001) ...
Serial Baud Rates Supported By NI-VISA - NI - National Instruments
https://www.ni.com/en-us/support/documentation/sup ...
Feb 27, 2020 ... This document provides the supported baud rates when using NI-VISA for serial communication.
IrDA, IR Products - ACTiSYS
http://www.actisys.com/IrDAProd.html
Jan 15, 2003 ... ACTiSYS IrDA & IrSimple Protocol Debug and Test Suite, and BER Tester · ACTiSYS ... ACT-IR321U supports IrDA-IrPHYTM (Raw IR) at data rates, 2.4k to 115.2k bps. ... Gives you the full IrDA speeds from 9.6K to 4M bps!
IrDA Standard - ACTiSYS Corporation
http://www.actisys.com/article.html
Wireless & IrSimple (TM) Connectivity! ... Infrared Data Association (IrDA) Infra- red has long been used as a transmission medium for TV/VCR controllers, calculators, printers, and PDAs. ... Once connection is made, the negotiated data rate can be as high as 115.2 kbps (IrDA-1.0) or 4 Mbps (IrDA-1.1), the ... To implement IrDA-1.1 (1.152M and/or 4M bps) external serial adapter, RS232 port is too slow.
UART baud rate - ESP32 Forum
https://www.esp32.com/viewtopic.php?t=1285
UART baud rate. Postby underwater » Sat Feb 25, 2017 6:46 am. Hello, I read the AT instruction set and examples and it states the maximum baudrate for the UART is 5000000 baud. Is that a limitation of the hardware or are higher baudrates ...
UART baud rate - ESP32 Forum
https://esp32.com/viewtopic.php?t=1285
UART baud rate. Postby underwater » Sat Feb 25, 2017 6:46 am. Hello, I read the AT instruction set and examples and it states the maximum baudrate for the UART is 5000000 baud. Is that a limitation of the hardware or are higher baudrates ...
FTDI ft232h at 4 Megabaud UART | AVR Freaks
https://www.avrfreaks.net/forum/ftdi-ft232h-4-mega ...
I tried several common and uncommon baud rates from 9600 to 4M baud. All baud rate work pretty well, up to 3M baud. The theoretical limit of the XMEGA USART is 4M baud, but I can't make it work. After reading several FTDI ...
TK1 Serial Port issue on Highest baud rate (more than 4000000 ...
https://forums.developer.nvidia.com/t/tk1-serial-p ...
Feb 29, 2020 ... Now I am able to set /dev/ttyTHS0 baud_rate up to 4000000(4M),but the documents say that speed of TK1 UART supports is up to 12.75Mbps.So I really want to know how to do that. btw,I used this setserial /dev/ttyTHS0 b…
Solved: iMX6: UART refuse to set baud rate to 1 Mbps - NXP ...
https://community.nxp.com/t5/i-MX-Processors/iMX6- ...
My problem is that I can not set the baud rate to 1000000 bit per second (1 Mbps) . # stty -F /dev/ttymxc4 1000000 stty: invalid argument '1000000'. I also toggled the hardware flow ...
High Speed Serial (UART) communication is failing for 3M baud rate ...
https://stackoverflow.com/questions/40798607/high- ...
I am able to communicate through ttyS2 successfully till 921800 baud rate with software flow control , but for higher baud rates i.e 3M/4M there is FIFO overrun at the receiver side. The FIFO_SIZE is 16 bytes and I have tried ...