About: 102000 results

Part 6 - USB Made Simple
http://www.usbmadesimple.co.uk/ums_6.htm
As mentioned before, the high speed additions to the specification were introduced in USB 2.0 as a response to the higher speed of ... If the hub is high speed capable then it will monitor the K-chirp from the device until it sees it completing.
BaofengUV5R - CHIRP
https://chirp.danplanet.com/projects/chirp/wiki/Ba ...
Cannot Start (Code 10) in Windows 8; - CHIRP does not support my (Model Radio)- Radio Version Not Supported- ... After making this change, you must unplug and replug your USB programming cable for the new com port number to be ...
CableGuide - CHIRP
https://chirp.danplanet.com/projects/chirp/wiki/Ca ...
The exception to this are the very low cost USB cables that come with many Chinese radios that use a counterfeit ... high quality USB programming cables that are based on the FTDI chip, these cables may or may not work with CHiRP and any ...
FAQ - CHIRP
https://chirp.danplanet.com/projects/chirp/wiki/FA ...
These cables simply have a USB-to-Serial adapter integrated into the cable itself, and are easier to manage and hook up. Follow the same procedures as if you were using a separate adapter.
CableGuide FTDI OEM Cables - CHIRP
https://chirp.danplanet.com/projects/chirp/wiki/Ca ...
Some cable vendors use the FTDI serial chip in their USB radio cables, but have changed the chip's ID codes so that the cable will not be recognized as a generic serial communications port. By default CHIRP (and some other software) will ...
USB2.0の仕様概要 | ルネサス エレクトロニクス - Renesas Electronics
https://www.renesas.com/us/ja/solutions/key-techno ...
基本仕様; IEEE1394との違い; 電気的仕様; EOPとSYNC; Chirp Handshake; 転送 レートの違い; PINGとNYET; Split Transaction; スペックの差; ディスクリプタ; USB リクエスト. 基本仕様. USB2.0はUSB1.xとの互換性を維持したまま、より高速な動作の 実現 ...
USB2.0の仕様概要 | ルネサス エレクトロニクス - Renesas Electronics
https://www.renesas.com/tw/ja/solutions/key-techno ...
低速のUSBのデバイスはコスト/パフォーマンスの点からUSB2.0のhigh-Speed modeに対応する事はないでしょう。これらはBluetoothなどの無線 ... Chirp handshakeは以下のようなタイミングでUSB Reset sequenceの間に行われます。 Chirp handsake ...
Detecting a High-Speed USB Device - Developer Help
https://microchipdeveloper.com/usb:high-speed-dete ...
Device "Chirp". During reset a High-Speed Device will assert a 17.8 mA signal on D- for at least 1 ms. This causes the hub to see a voltage of 0.8 V on D-. If the hub is high speed capable it will respond. Low speed and full speed only hubs will ...
USB-IF USB 2.0 Electrical Compliance Test Specification ... - USB.org
https://www.usb.org/sites/default/files/USB_2_0_El ...
Nov 6, 2016 ... This document provides the compliance criteria and test descriptions for USB 2.0 high-speed electrical testing, full-speed ... EL_27 Devices must transmit a chirp handshake no sooner than 3.1ms and no later than 6.0ms when.
USB (Communications) - Wikipedia
https://en.wikipedia.org/wiki/USB_(Communications)
This article provides information about the communications aspects of Universal Serial Bus, USB: Signaling, Protocols, Transactions. ... USB 2.0 devices use a special protocol during reset, called chirping, to negotiate the high bandwidth mode with the host/hub. A device that is USB 2.0 High Speed capable first connects as ...